Top 10 Best adxl345 accelerometer klipper kit in 2026

Last Updated - 6/13/2026

🏆Best Choice

BIQU

BIGTREETECH ADXL345 V2.0 Accelerometer Board Klipper Input Shaping 3D Printer Hotend Parts Sensor Module Support USB Connection for Voron Stealthburner

9.8

ChoiceComparer.com Score

9.8

/ 10

Outstanding

Main highlights

•Plug-and-Play: Effortlessly connect ADXL345 to your Klippered printer with a simple setup, taking advantage of high-performance MCU hardware SPI for data sampling and communication, and enjoy compatibility with various host systems, easily connect to Raspberry Pi or Manta boards + CB1 with USB ports using a standard USB-A to USB-C cable
•Flexible Mounting Options : Method 1: StealthBurner Direct Mount- Effortlessly install ADXL345 in the designated location, streamlining the setup process and saving valuable time; Method 2: Nozzle Mount- Attach near the nozzle for precise measurements
•Meets the Needs of Klipper Input Shaping: Accurately measures resonance frequencies, reducing print rippling at high speeds and accelerations for more precise detail
•Effortless Wiring & Durable Connections: Reserved solder points enable users to customize wiring easily, ENIG mounting holes ensure stable connections and durability
•What's in the Box？ADXL345 V2.0.1 × 1, M6 x 13 x 2 Silicone Ring × 2, M6 x 8 Socket Head Cap Screw × 1.All parts are rigorously tested before leaving the factory

View offer on:

$15.99

Check Price

WWZMDiB

WWZMDiB 2Pcs ADXL345 3-Axis Accelerometer Sensor Module IIC/SPI Transmission Compatible with for Arduino GY-291 3D Printer Klipper

9.6

ChoiceComparer.com Score

9.6

/ 10

Outstanding

Main highlights

•ADXL345 3-Axis Accelerometer Sensor Module: Measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or shock
•Voltage： 3-5V（5V is Recommended）
•Accelerator Range：+/-2G, +/-4G, +/-8G, +/-16G
•Communication method: SPI (3- and 4-wire) and I2C digital interfaces

View offer on:

$6.99

Check Price

Isik's Tech

KUSBA: Klipper USB Accelerometer

9.5

ChoiceComparer.com Score

9.5

/ 10

Outstanding

Main highlights

•Makes measuring resonances much easier by simplifying the wiring and config
•You just need this PCB and a USB C cable, no complicated and unreliable SPI wires
•Compatible with every 3D printer running Klipper and has a free USB port
•Comes with (Rampon Anchor) firmware pre-flashed

View offer on:

$19.99

Check Price

ST SHILLEHTEK

SHILLEHTEK ADXL345 Pre-Soldered 3-axis Accelerometer Compatible with Klipper, Raspberry Pi & Arduino | High Resolution Tilt-Sensing Accelerometer | Resonance Frequencies Measurement & Klipper Autotune

9.3

ChoiceComparer.com Score

9.3

/ 10

Excellent

Main highlights

•[OPTIMIZED FOR KLIPPER]: Enhance your 3D printer's performance with the SHILLEHTEK ADXL345 accelerometer. This sensor provides crucial data, boosting the accuracy and precision of your printer’s movements. Ideal for users seeking to leverage Klipper’s advanced features.
•[FLAT FINISH FOR STABILITY]: Redesigned to offer a flat finish, the SHILLEHTEK ADXL345 features pre-attached pins engineered for stability and high performance. This design ensures reliable measurements, perfect for use with Klipper firmware and other demanding applications.
•[PRE-SOLDERED CONVENIENCE]: Get started immediately with the pre-soldered SHILLEHTEK ADXL345. This user-friendly accelerometer saves you time and hassle, eliminating the need for soldering skills or additional equipment. A practical choice for both beginners and experienced users.
•[VERSATILE INTERFACING]: The SHILLEHTEK ADXL345 supports both SPI and I2C interfaces, allowing for flexible and easy integration with Raspberry Pi, Arduino, and other microcontrollers. This makes it an adaptable solution for a wide range of projects and applications.
•[APPLICATIONS]: Ideal for mobile and stationary applications, the SHILLEHTEK ADXL345 accurately measures tilt and dynamic accelerations. It’s perfect for devices requiring high-resolution tilt sensing, motion tracking, or shock detection—enhancing both personal and professional projects.

View offer on:

$9.00

Check Price

JESSINIE

JESSINIE 3 Pack Digital Accelerometer ADXL345, 3-Axis Low Power I2C SPI 5V/3.3V Input, Detection 16g Range

9.2

ChoiceComparer.com Score

9.2

/ 10

Excellent

Main highlights

•【Efficient and Low Power Consumption】Featuring the ADXL345 digital output accelerometer with ultra-low power consumption, for mobile and battery-operated devices. Power consumption as low as 23 μA in measurement mode and 0.1 μA in standby mode.
•【Wide Voltage Compatibility】Supports both 5V and 3.3V voltage input with the onboard RT9161 power supply chip. Enjoy faster load response speed and lower voltage drop, for high-noise power environments.
•【User-Friendly Design】Commonly used pins are pinned out with a standard 100mil (2.54mm) pitch, making it easy to use on dot-matrix boards. Compact size of 28mm x 14mm with double sided PCB for durability.
•【Advanced Sensing Functions】Equipped with single tap/double tap detection, activity/inactivity monitoring, and free-fall detection. These functions can be mapped to either of two interrupt output pins, enhancing application flexibility.
•【Resolution and Shock Survival】Provides a full resolution of up to 13-bit at
•16 g, with a 10,000 g shock survival rating. Digital output data is available in 16-bit two's complement format via SPI or I2C interfaces, making it highly suitable for motion and tilt-sensing applications.

View offer on:

$8.44

$9.93

-15%

Check Price

Wishiot

Wishiot ADXL345 Digital Accelerometer Module IIC/SPI 3-Axis Inclination Tilt Sensor with 10Pin Female to Female/Female to Male Dupont Cable for Arduino Raspberry Pi (Pack of 2)

9.0

ChoiceComparer.com Score

9.0

/ 10

Great

Main highlights

•1, Onboard ADXL345 digital output (support I2C/SPI), low power consumption, compact accelerometer
•2, Support 5V/3.3V voltage input, onboard RT9161 power chip, lower voltage drop compared with chip 1117, faster load response speed, very suitable for high-noise power supply environment
•3, The commonly used pins have been drawn out, and it is soldered with standard 2.54mm pin header, which is convenient for dot matrix boards
•4, Prepared 2 cables for this module, Female to Female cable is for ADXL345 with MCU which is onboard male pin header like Raspberry Pi board, while Female to Male cable is for ADXL345 with MCU which is onboard female header such as UNOR3board
•5, What you will get is 2pcs ADXL345 Accelerometer module + 1pc 10Pin 2.54mm Female to Female Dupont Cable 20cm + 1pc 10Pin 2.54mm Female to Male Dupont Cable 20cm

View offer on:

$13.99

Check Price

Adafruit

Adafruit ADXL345 Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI [ADA1231]

8.8

ChoiceComparer.com Score

8.8

/ 10

Great

Main highlights

•Added on-board 3.3V regulator and logic-level shifting circuitry
•Three axes of measurements, X Y Z with 4 options for sensitivity level.
•Pins that can be used either as I2C or SPI digital interfacing
•Fully Assembled and tested
•Perfect choice for interfacing with any 3V or 5V microcontroller such as the Arduino

View offer on:

$22.99

Check Price

SunFounder

SunFounder Digital Accelerometer ADXL345 Module Compatible with Arduino and Raspberry Pi

8.7

ChoiceComparer.com Score

8.7

/ 10

Good

Main highlights

•The ADXL345 is a small, thin, low power, three-axis accelerometer with high resolution (13-bit) measurement up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface
•Flexible interrupt modes – Any interrupt mappable to either interrupt pin
•32 level output data FIFO minimizes the load of the host processor
•Measurement ranges selectable and bandwidth selectable via serial command
•Working voltage: 3.3v-5v; PCB size: 1.3 x 2.3 cm

View offer on:

Check Price

AITRIP

AITRIP 10Pcs ADXL345 3-Axis Accelerometer Sensor Module IIC/SPI Transmission Compatible with for Arduino GY-291

8.5

ChoiceComparer.com Score

8.5

/ 10

Good

Main highlights

•Up to ±16 g accelerometer with high resolution (13) measurement. Digital output
•ADXL345 is very suitable for mobile device applications. It can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. With its high resolution (4mg/LSB), it can measure changes in the inclination angle of about 0.25°. Use ADXL345 digital output timing acceleration, etc., no timing
•Communication method: IIC / SPI communication protocol
•The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °
•According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
•Appliactions: It can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming.

View offer on:

$16.99

Check Price

📊

📈 How we rank

With our cutting-edge technology, we examine thousands of products and retailers, assessing reviews, ratings, trends, and sales rankings to identify what matters most to users like you.

Our team evaluates this data alongside genuine user feedback, merging AI analysis with human insights to provide you with real-time, highly-rated recommendations that empower your decision-making with clarity and confidence.