Top 10 Best rack a tiers in 2026

Last Updated - 6/10/2026

🏆Best Choice

Rack-A-Tiers

Rack-A-Tiers Mark My Wire - 4 Pack (Black, Blue, Red & White - 1 Each), Wire Marker, Wire Phase Marker, Electrical Marker (52484)

9.8

ChoiceComparer.com Score

9.8

/ 10

Outstanding

Main highlights

•SAVE TIME – The convenient hole lets you thread your wire through the marker’s tip. This makes wire reidentification a breeze as you mark the entire wire in seconds with one smooth motion. No more tedious phase taping.
•LESS MESS – Work clean, organized, and consistent. The hole and notch system gives you more control over the marker and wire, preventing paint from covering your fingers or other wires. This wire marker also produces cleaner looking results than tape and in less time.
•PORTABLE – Easily able to fit in a tool pouch or bag, this electrical wire marker takes care of all your wire re-colouring needs without taking up too much space.

View offer on:

$16.65

Check Price

Rack-A-Tiers

Rack-A-Tiers 52455 Staple Shark Multi-Purpose Tool Removes Romex Staples and More (Оne Расk)

9.7

ChoiceComparer.com Score

9.7

/ 10

Outstanding

Main highlights

•Made of hardened steel.
•Nail puller, pry bar, ruler, electrical staple holder, and carpenter square.
•FUNCTIONAL – The most versatile staple puller available, Staple Shark can remove S1, S2, S3, and S4 staples, as well as “nail on” staples and cable straps without any adjustments. Not limited to cable staples, you can remove other construction staples such as carpet staples and flooring staples.
•MULTI-USE – With so many features, you will find new ways Staple Shark makes your job easier every time you use it. Not only is this the perfect staple remover, but it also features a built-in slot to hold staples so you can hammer them in tight spots. Staple Shark even has a ruler for quick measurements or use as a carpenter’s square.
•COMPACT – Weighing only 4 ounces and barely over 1/16th of an inch thick, this staple remover fits comfortably in your tool belt or pouch. The huge number of features on such a small tool makes this a convenient staple remover to always have on you. Staple Shark is a lightweight tool that will never slow you down or get in the way.
•DURABLE – The Staple Shark’s hardened steel construction means you can trust it to survive no matter how much work you throw at it. A purpose-built tool, this staple remover was designed to handle consistent use on the busiest job sites.

View offer on:

$14.99

Check Price

Rack-A-Tiers

Rack-A-Tiers 47010 V-Cutter NMSC Cable Stripper

9.5

ChoiceComparer.com Score

9.5

/ 10

Outstanding

Main highlights

•A new NM wire stripper to strip NMSC cable.
•Romex stripper attachment easily attaches to most wire strippers.
•NM cable stripper tool strips cable in or out of electrical boxes with action.
•Virtually eliminates nicking or cutting the wire insulator.

View offer on:

$12.88

Check Price

Rack-A-Tiers

Rack-A-Tiers Dirt Bag Electrical drilling catcher bag for Magnetic metal shavings, Non-Conductive Electrical Safety Drilling Tool Bag, 5X5X4 (84000)

9.4

ChoiceComparer.com Score

9.4

/ 10

Excellent

Main highlights

•Frame measurements: 5″ x 5″ OD (Outside Diameter) – 3 7/8″ x 3 7/8″ ID (Inside Diameter).
•Outer bag: Latex leather, Inner bag: Fiberglass cloth, Plastic frame: ABS.
•Anti-static liner.
•LESS MESS – Using cardboard to deflect or catch shavings will never be completely effective. Vacuum cleaners are difficult to fit in cramped spaces. The Dirt Bag is the best way to ensure you catch every metal shaving before it gets lost in your electrical panel.
•QUICK CLEAN – With Dirt Bag, you can drill holes in metal without having to stop and clean up metal shavings. This magnetic shaving catcher lets you spend more time working instead of cleaning.
•EFFICIENT – Why use cardboard to deflect shavings when you can just use the Dirt Bag? This tool allows you to use both hands for drilling so you can cut clean holes faster. The Dirt Bag compresses to fit into smaller areas so you can enjoy its ease of use during any job.
•PROTECTION – Metal chips can cause permanent damage to delicate electrical components like controls, breakers, switchgears, terminal blocks, contactors, and relays. Use the Dirt Bag to prevent metal shavings from landing in hard-to-reach areas and causing damage during electrical panel installation.
•SAFETY – Fewer loose metal shavings reduce your risk of injury. Rather than fishing around a cramped electrical box with your hands to clear out sharp metal shavings, you can trust this shaving catcher to capture them first.

View offer on:

$37.99

Check Price

Rack-A-Tiers

Rack-A-Tiers PulLee - Steel Wire Pulling Roller, Electrical Wire Pulling Tool, 4x4 Wire Pulling Guide, Steel Wire Roller for 4" Electrical Box (41100)

9.2

ChoiceComparer.com Score

9.2

/ 10

Excellent

Main highlights

•Spring loaded tips keep it locked in place.
•Stainless steel design for maximum strength.

View offer on:

$23.41

Check Price

Rack-A-Tiers

Rack-A-Tiers XL Multi-Purpose Cable Dispenser - Award Winning Electrical Wire Rack, Wire Spool Caddy (11470)

9.1

ChoiceComparer.com Score

9.1

/ 10

Excellent

Main highlights

•Fits wire reels up to 40” (1 m).
•Rated for wire reels weighing up to 500 lbs. (226 kg).
•Made in the USA.
•DISPENSE WIRE – Rack-A-Tiers XL are unmatched in their ease and speed of set up as a wire spool rack. With 11 holes, 3 handles, and two ‘V’ notches, this wire dispenser can handle multiple reels of varied sizes and weights making it a tool you’ll want at every job site.
•SAWHORSE – Rack-A-Tiers XL wire dispenser excels as a sawhorse. Simply place the two sides at the appropriate distance to support what you’re cutting. The XL wire dispenser is perfect for cutting lumber and conduit and can be screwed down into the floor for improved stability.
•PIPE VISE – The two ‘V’ notches on the Rack-A-Tiers XL cable dispenser make an excellent ‘pipe vise’ and conduit rack for all sizes of conduit or other irregular shaped materials like steel studs, moldings, angle iron, and strut.
•WORK BENCH – Interlock the Rack-A-Tiers XL to form a convenient seat or work bench. Each Rack-A-Tiers XL base has four 1 3/8” (35 mm) holes and ‘gun sight’ alignment marks for precise drilling. More than just a wire dispenser rack, this tool will always be useful.

View offer on:

$154.49

Check Price

Rack-A-Tiers

Rack-A-Tiers Rough-In Bit Kit - 7 pcs Driver Bit Set, Electrical Bits, Double Ended Impact Bits, Electrician Drill Bit Kit, Electrical Rough-In Impact Bits (Rough-In Kit) (72711)

8.9

ChoiceComparer.com Score

8.9

/ 10

Great

Main highlights

•4” – #1 Green/#2 Red Robertson Square Double-Ended Impact
•6” – #1 Green /#2 Red Robertson Square Double-Ended Impact
•4” – #2 Blue Phillips/#2 Red Robertson Square Double-Ended Impact
•6” – #2 Blue Phillips/#2 Red Robertson Square Double-Ended Impact
•6” – #1 Green Robertson Square
•6” – #2 Red Robertson Square
•4” – #3 Black Robertson Square

View offer on:

$19.99

Check Price

Rack-A-Tiers

Rack-A-Tiers Pull Buddy - Multi-Pack Wire Pulling Guides, Prevent Wire Damage During Pulls, Conduit Wire Pulling Tool, Electrical Box Cable Pulling Tool (42000)

8.8

ChoiceComparer.com Score

8.8

/ 10

Great

Main highlights

•The multi 6 pack will give you 2 of each size: 1/2 in., 3/4 in. and 1 in. (which will fit many different applications)
•Turns wire pulling into a one person job.
•Significantly reduces the chance of damaging wires.
•Comes in a variety of colours for easy identification no matter the environment.
•Reusable

View offer on:

$20.99

Check Price

Rack-A-Tiers

Rack-A-Tiers Wire Dispenser - Electrician's Wire Spool Rack, Multi-Purpose Cable Dispenser, Award Winning Electrical Wire Rack, Wire Spool Dispenser, Wire Reel Caddy (11455)

8.6

ChoiceComparer.com Score

8.6

/ 10

Good

Main highlights

•Fits wire reels up to 34” (0.9m).
•Rated for wire reels weighing up to 300 lbs. (150 kg).
•Five 1 ¾” holes to accommodate different wire reel sizes. Several reels can be accommodated at the same time across multiple pieces of conduit.
•DISPENSE WIRE – Rack-A-Tiers are the quickest and easiest wire spool rack to set up. This wire dispenser has 5 holes, 3 handles, and two ‘V’ notches for supporting wire reels of varied sizes and weights. It’s an electrician tool that you’ll want to have with you on every job site.
•SAWHORSE – With the two halves of the Rack-A-Tiers placed apart you can use them to support lumber or conduit for cutting. Able to be screwed into the floor for increased stability, this wire dispenser excels as a sawhorse.
•PIPE VISE – The Rack-A-Tiers cable dispenser has two ‘V’ notches that serve as a great ‘pipe vise’ for conduit, steel studs, moldings, angle iron, strut, and other irregularly shaped materials. By combining a wire spool dispenser and a pipe vise into one tool, you can enhance your work speed and efficiency.
•WORKBENCH – Connect the Rack-A-Tiers to create a handy chair or workbench. Each base of the Rack-A-Tiers has four holes measuring 1 3/8 inches (35 mm) and alignment marks which make it easy to drill accurate holes. More than just a wire dispenser, this tool works as the perfect seat for your lunch break.

View offer on:

$123.23

Check Price

Rack-A-Tiers

Rack-A-Tiers LB Wire Guide, Shoehorn Wire Pulling Guide, for Use with PVC LB Fitting, PVC (42200)

8.5

ChoiceComparer.com Score

8.5

/ 10

Good

Main highlights

•Fits 2” PVC LBs and can be adapted to most 2” metal LBs.
•WIRE PROTECTION – Without a wire guide, the cable abrasion from pulling wire through an LB fitting can do serious damage. You can trust the LB Wire Guide to help you smoothly feed conduit through fittings. Keep your wire in perfect condition with this ingenious tool!
•EFFICIENT – LB Wire Guide saves you time and effort by helping you pull wire by yourself. The perfect solution for solo conductor installations in tight spaces, use this LB conduit fitting shoehorn and stop wasting time fighting with stubborn conduit.
•VERSATILE – Made for 2” PVC LB fittings but can be adapted to most 2” metal LBs. The LB Wire Guide has a double-ended design that can be used to fit either end of the conduit body.
•SAFE – Using a wire guide helps prevent your knuckles from scraping across LBs as you feed conduit through. Keep your hands in good shape so you can continue to work comfortably. LB Wire Guide is the easiest way to protect your hands while working with conduit fittings.

View offer on:

$21.99

Check Price

📊

📈 How we rank

With our cutting-edge technology, we examine thousands of products and retailers, assessing reviews, ratings, trends, and sales rankings to identify what matters most to users like you.

Our team evaluates this data alongside genuine user feedback, merging AI analysis with human insights to provide you with real-time, highly-rated recommendations that empower your decision-making with clarity and confidence.