Top 10 Best dock parts in 2026

Main highlights

• •Made in Canada
• •Package height :25.908 cm
• •Package length :13.97 cm
• •Package width :17.78 cm
• •Package weight :1.647 kg

Main highlights

• •Heavy Duty Hardware Stationary Dock Bottom Pad: Dock brackets hardware constructed from marine grade 11 Gauge hardware steel for dock posts and poles; Welded on a heavy duty 8" x 8" backer plate, featuring solid, durable and rustproof in the freshwater and marine environments; Stationary dock base plate hardware is aiming to provide the long useful service for your floating docks
• •Hold Docks to Prevent Sinking into Mud: Dock foot plate provide stable support and prevent sinking down in the mud for the wooden or aluminium docks by the dock foot plate to securely hold the dock leg pipe post pole foot; 8"x 8" dock base plate is wide for reducing the pressure and increasing the stability
• •Compatibility: Inner diameter of the dock bottom pad is 2.1/8" (5.3 cm) and fit round dock posts poles; the height of the dock pipe holder is 4" and design for 2 set screws for more stability; Accommodating various pipe sizes by side of dock brackets hardware set screws
• •Easy Installation: The dock base plate is mounted on the ground and river bottom with sand, mud and rock; Make the dock leg foot through the dock base plate to the bottom and then tightening the set screws to firmly fix the dock support leg
• •Warm Tips: The industry standard calls the floating dock pipe size as 1.5″ schedule 40 but the O.D. is actually 1 7/8″; Please check the size of dock leg pipe before purchasing dock foot base pad
• •Other Hardware for Floating Dock Building:The stationary dock side leg pipe holder bolts to the side of the wood floating dock frames to stabilize your pier (ASIN: B0D47V2P9M); The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier (ASIN: B0D47TS6FS); Dock Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections (ASIN: B0D47VHP8J); If you need these hardware for dock building, please search the ASIN on the amazon

Main highlights

• •Stationary Dock Heavy Duty Side Leg Pipe Holder: Dock brackets hardware constructed from marine grade hardware steel for dock posts and poles; Welded onto a heavy duty 5" x 5" backer plate, featuring solid, durable and rustproof in the freshwater and marine environments; Stationary dock heavy duty side leg pipe holder is aiming to provide the long useful service for your floating docks
• •Build Floating Docks: Stationary dock heavy duty side leg pipe holder bolts to the side of the wood floating dock frames to support dock posts poles, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake
• •Compatibility: Inner diameter of the floating dock pipe holder is 2.1" and fit round dock posts poles; Accommodating various pipe sizes by side of dock brackets hardware set screws; The floating dock barckets hardware mounting holes is 7/16”fitting for 3/8" carriage bolts (carriage bolts are included)
• •Easy to Use: Pre-punched bolt patterns allows dock pipe barckets to easily install directly to the side of dock frame; Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts (included); Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float
• •Warm Tips: The industry standard calls the floating dock pipe size as 1.5″ schedule 40 but the O.D. is actually 1 7/8″; Please check the size of dock leg pipe before purchasing dock pipe barckets
• •Other Hardware for Floating Dock Building: The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier (ASIN: B0D47TS6FS); Dock Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections (ASIN: B0D47VHP8J); If you need these hardware for dock building, please search the ASIN on the amazon

Main highlights

• •Dock Heavy Duty Hardware: Constructed from marine grade hardware steel and welded onto a heavy duty 5" x 5" backer plate, featuring solid, durable and rustproof to fit for the freshwater and marine environments. Stationary dock heavy duty corner leg pipe holder is aiming to provide the long useful service for your floating docks.
• •Build Floating Docks: Stationary dock heavy duty side leg pipe holder bolts to the corner of the wood floating dock frames to support a dock pipe leg, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake.
• •Compatibility: The inner diameter of the stationary dock pipe holder is 2.1"and fit for round dock side leg pipe. Accommodating various pipe sizes by side bracket set screws. The dock pipe brackets mounting holes is 7/16”fitting for 3/8” carriage bolts (carriage bolts are not included).
• •Easy to Use: Pre-punched bolt patterns allows to easily install directly to the side of dock frame. Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts (not included). Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float.
• •Warm Tips: The industry standard calls the floating dock pipe size as 1.5″ schedule 40 but the O.D. is actually 1 7/8″. Please check the size of dock leg pipe before purchasing.
• •Other Dock Heavy Hardware for Building Floating Docks: The stationary dock side leg pipe holder bolts to the side of the wood floating dock frames to stabilize your pier (ASIN: B0D47V2P9M). Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections (ASIN: B0D47VHP8J). If you need these dock heavy duty hardware, please search the ASIN on the amazon.

Main highlights

• •Add two additional legs to your dock - Fits round dock legs up to 1-7/8" diameter
• •Post brackets use two mounting brackets, one on each side of the dock's faceboard, for a solid connection to the dock
• •Heavy-duty steel construction provides exceptional strength, while the galvanized finish protects against rust and other damage in freshwater marine environments
• •Includes two post brackets, four mounting plates, and four hex head screws for locking the legs
• •Due to the variety of surfaces to which the brackets may be applied, mounting hardware is not included

Main highlights

• •1. High-Quality Hardware: All stationary dock connector hinge hardware are made of 11-gauge (1/8-inch nominal) hot-dip galvanized steel. The uniform coating increases durability and effectively prevents paint peeling and cracking.
• •2. Product Dimensions: The connector hinge backplate measures 3-1/2"x5", is 3/16" thick, and has a 7/16" hole diameter. It comes with a 3/8" carriage bolt to ensure a secure installation.
• •3. Versatile Hole Configuration: The universal hole placement fits 2"x8" and larger lumber. It matches any 3-1/2", 4-1/2", or 5-1/2" bolt pattern, providing flexibility for a variety of dock construction needs.
• •4. Easy Installation: Simply align and match the two pieces, mark and drill the center of the hole. Then mount the floating dock hinge on the wooden dock for a quick installation.
• •5. Optimized Connection: The spacing design between the floating dock hinge brackets facilitates connection with the main pin and locking pin, enhancing the convenience of installation and the stability of the connection.

Main highlights

• •PREVENTING SINKING: Dock hardware is designed for fixing wooden or aluminium boat docks, the bottom 4.7" metal base plate can effectively disperse the pressure and increase its stability, which is a great solution to dock posts sinking into the muck.
• •HIGH QUALITY MATERIALS: Boat dock hardware is made of hard metal material, and excellent welding technology is used at the interface to make it more sturdy, even under great pressure, it will not easily deform and support your dock well.
• •LONG SERVICE LIFE: Floating dock hardware surface uses a special spraying process, which has excellent rust and corrosion resistance, and will not be greatly damaged even in harsh environments such as seawater and sludge for a long time.
• •EASY AND FAST INSTALLATION: Stationary dock hardware can easily fix dock columns with a diameter of no more than 2 inches, simply threading the column through dock hardware and then tightening the bolts to firmly fix it on the riverbed.
• •MULTI- PURPOSE BASE: Stationary dock base plate hardware is not only suitable for supporting boat dock at the bottom of silt, but also very perfect for patio tables and outdoor umbrella bases to ensure greater stability and safety.

Main highlights

Main highlights