Top 10 Best synthrotek in 2026

Main highlights

• •A great kit for beginners!
• •Arcadian Rhythms is an arcade button module that can be used to trigger drums, envelopes and other events in a Eurorack system.
• •When the buttons are pressed, they light up and send a gate.
• •As long as a button is held down, the gate remains high.
• •The brightness between colors will vary slightly, but the trimmers on the back of the module will adjust the LED brightness so the three buttons match.

Main highlights

• •The Kit of the MIX module.
• •This simpler passive mixer is suitable for mixing both audio and control voltage sources.
• •Three channel inputs mix down to one output.
• •It is not external interference when not patched.
• •Module screws included.

Main highlights

• •2x 1-to-3 passive multiplier or one 1-to-6 passive multiplier
• •Input one cascades to all 6 output jacks, or can be interrupted by plugging a cable into input two.
• •Width: 2HP
• •Depth: 14mm
• •Current draw: none!

Main highlights

• •2 channels, 2 inputs per channel
• •Jumper select ~unity gain or gain ~x2 (6db boost) amplification
• •Mixes both AC signals (audio) and DC signals (gates, triggers, CV)
• •Stereo output with panning per channel
• •Attenuator and amplifier per channel

Main highlights

• •USB Power is a light-duty Eurorack power supply designed for mini systems, for testing, and for portability.
• •Plug in a single module, a flying bus cable for multiple modules, or plug it directly into a bus board header.
• •Plugs into a USB wall wart, USB battery pack/power bank, and USB car cigarette lighter adapter (plugging into computer is not recommended)
• •LED power indicators for +12V, -12V and +5V rails
• •Noise filtering capacitors
• •Cincon option power output: +12V: 125mA, -12V: 125mA, +5V: 0-125mA* Recom option power output: +12V: 250mA, -12V: 250mA, +5V: 0-125mA*
• •Holes for easy mounting to your case or workbench
• •USB power cable included

Main highlights

• •The Kit version of the MIDI-CV II contains all the components needed for the module
• •Two CV and Gate outputs
• •Configurable MOD output – modulation wheel or velocity
• •Analogue glide on both MIDI channels
• •One or two MIDI channel configuration

Main highlights

• •Easy project for beginners!
• •Stronger bass frequencies and more steps than the original APC
• •3 potentiometer controls - Frequency (VR2) and Pulse Width (VR3) contour the tone while the Volume control (VR1) sets your output just right
• •2 Control Voltage (CV) inputs allows step sequencers and waveform generators to expand the sonic capabilities of the Atari Punk Console from drone to arpeggiated dynamism
• •Requires a 9V battery or a 2.1-2.5mm 9V center negative power supply of at least 50mA (not included)

Main highlights

• •Great for quickly (and musically) starting a patch, augmenting a patch, and performing live!
• •The Random Sequencer generates quantized random or 8 or 16 step randomly generated sequences.
• •It generates quantized voltages between 0 and +4V. In the sequencer modes, the module repeats the last 8 or 16 randomly generated steps as a sequence.
• •In addition to being used as a random module, it also doubles as a master clock generator, ranging from 8ms to 50 seconds.
• •Clock reset jack: resets the clock when it receives a +5V pulse, useful for syncing with external clocks.

Main highlights