Top 10 Best oscilloscope kit in 2026

Main highlights

• •【Faster Sampling Speed】FNIRSI DSO152 handheld oscilloscope has a real-time sampling rate of 2.5 MS/s and a 200 KHz bandwidth. The 10 x probe can measure up to 800 VPP, which is equivalent to 280 V AC. Voltages up to 400 V can be measured
• •【Professional Designed 】The DSO152 automotive oscilloscope supports full trigger modes(Auto/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. 2.8'' HD LCD display screen, a resolution of 320*240, clear to observe
• •【Portable Oscilloscope】Pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems. Applicable to the maintenance industry and R&D education industry
• •【Easy Measuring】Equipped with efficient one-key AUTO setting of all parameters, the measured waveform can be displayed without cumbersome adjustment. Long press the AUTO button to quickly calibrate the baseline,fast measurement of waveforms
• •【Longer Battery Life】FNIRSI DSO152 digital oscilloscope has a built-in 1000 mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. Type-C interface supports data transmission and charging, firmware upgrade

Main highlights

• •Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 100MHz,Usable with Scopes having Bandwidth up to 100 MHz.
• •Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
• •Fully-Shielded Welded BNC Connector, Small Signal Interference; Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability.
• •1 x BNC to double-headed alligator clip test line; 1 x BNC to double-head test hook test line; 1 x BNC to double-stack test line; 1 x Double-headed BNC coaxial line.
• •Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector.

Main highlights

• •Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use.
• •Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading.
• •The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation.
• •Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more. The included BNC to BNC, BNC to alligator clip, BNC to test hook, BNC to banana plug test lead, piercing probes extends the performance of the test leads kit.
• •Package includes: 2 x 100MHz probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual, 1 x BNC to BNC test lead, 1 x BNC to alligator clip test lead, 1 x BNC to test hook test lead, 1 x BNC to banana plug test lead, 2PCS wire piercing probes.

Main highlights

• •This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.
• •With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).
• •With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.
• •Partially open-sourced,the MCU has been programmed.The oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.The case is unassembled and requires assembly.
• •Adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users.

Main highlights

• •Build your own oscilloscope with Korg's Nu:tekt NTS-2 DIY kit, easy assembly with no soldering required.
• •Compact and portable design, fits in the palm of your hand for easy transport.
• •Features a 4-channel oscilloscope for monitoring control voltage and audio signals.
• •Includes a flexible waveform generator for creating custom waveforms.
• •Equipped with a spectrum analyzer and tuner for comprehensive signal analysis.
• •Simple, clean, and intuitive interface for easy use and quick understanding of signals.
• •Dual stereo IN, dual stereo THRU/OUT, and two separate OUTPUTs for versatile connectivity.
• •Ideal for musicians and creators of all backgrounds and experience levels.
• •Enhances learning and experimentation with visual signal representation.
• •Perfect for studio and live performance use, adding precision to your setup.

Main highlights

• •1. Compact & Portable Design – Lightweight and handheld, perfect for on-the-go electronics testing and soldering practice.
• •2. Beginner Friendly Learning Tool – Ideal for students and hobbyists to master oscilloscope functions and soldering techniques.
• •3. High Accuracy & Real-Time Display – Features a clear digital screen for precise waveform measurements and instant feedback.
• •4. Complete DIY Kit – Includes all necessary components for assembly, enhancing hands-on circuit-building skills.
• •5. Multi-Purpose Use – Great for troubleshooting circuits, analyzing signals, and practicing PCB soldering projects.

Main highlights

Main highlights

• •Signals: alternating current (ac), adjustable ac, full- and half wave rectified ac, smoothed direct current (dc), ripple and astable oscillator
• •Assembled and tested, not soldering required
• •Model Number: EDU06-VP
• •Country Of Origin: Hong Kong

Main highlights

• •The kit uses ARM Cortex-M3 processor (STM32F103C8) and contains a 2.4-inch color TFT display, which can be used as an ARM development test board. High-definition display
• •Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting.
• •The oscilloscope is partially open-sourced. Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc.
• •The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training.It's easy to assembly
• •The oscilloscope kit is specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself.