Top 10 Best herocut in 2026

Main highlights

• •[Plasma Cutting Thickness]: The plasma cutting equipment with advanced IGBT inverter technology, this high-frequency plasma cutter operates on both 110V and 220V power sources at 50/60 Hz, offering a 60% duty cycle. When using 110V power, it delivers 15-40A of cutting current; on 220V, it ranges from 15-55A. The recommended maximum cutting thickness is 12mm at 40A and 45PSI on 110V , and 20mm at 65A and 70PSI on 220V
• •[Non-Touch Pilot Arc Plasma Cutter]: The CUT65i plasma cutter features a pilot arc function that utilizes high-frequency, non-touch pilot arc. The torch doesn’t need to touch the metal surface to start cutting. The PA (Pilot Arc) adjustable setting allows users to control how long the pilot arc remains active, helping reduce power consumption when not in use and decreasing electrode wear, which ultimately prolongs the life of consumables
• •[Built-in Air Sensor System]: This machine includes an internal air sensor that shows air pressure directly on the front panel. Manual adjustment is possible via the air regulator (automatic pressure adjustment is not supported). A rear-mounted air filter and quick-connect 1/4 NPT fitting allow for fast setup. It’s ready to use right away when connected to an air compressor, with optimal performance at 65 PSI and 250 liters per minute airflow (NOTE: Not included the air compressor)
• •[PT/2T/4T/PA Function]: The post-flow cooling time can be adjusted between 3-15 seconds, which helps dissipate heat from the torch head and extend the life of consumables. A setting of 4-8 seconds is typically suggested for optimal performance. The 2T/4T modes provide different levels of automation in cutting operations, reducing the need for manual control. In 2T mode, the system offers semi-automatic operation, while 4T enables fully automatic cutting. The PA (Pilot Arc) function allows adjustment of the pilot arc duration - longer durations are suitable for cutting materials like mesh metal, while shorter durations help reduce wear on consumable parts
• •100% Duty cycle in light work, 60% Duty cycle in heavy work; Max cutting thickness 12mm in 110V 45PSI 40Amps 100mm/min cutting speed, Max cutting thickness 20mm in 220V 70PSI 65Amps 150mm/min cutting speed
• •[Screen Display Synergic Control]: Equipped with a clear digital display, this unit provides real-time monitoring of key parameters such as air pressure, voltage, and current. Users can easily adjust settings on the fly, improving overall efficiency. In case of a malfunction, the screen will show an error code, making it easier to identify and resolve issues quickly

Main highlights

• •[Specifications]Herocut CUT35i plasma cutter 35Amps, single voltage 110V, 60% duty cycle, 50/60Hz power and advanced IGBT inverter technology, current display 15-35A, Clean cutting thickness 6mm and Max cutting thickness 10mm
• •[PT/2T/4T Function]The post-time function, you can adjust the cooling time of the plasma cutting torch within 2-15 seconds to extend the service life of consumables. We recommend a cooling time of 4-8 seconds. The 2T/4T automatic cutting function provides an improved cutting experience. 2T is semi-automatic control, while 4T is fully automatic control
• •[Cutting Materials] The plasma cutting equipment easy to cut stainless steel, alloy steel, mild steel, copper,aluminum etc. The CUT35i plasma cutter uses PT31 plasma cutting torch, Max cutting thickness is 2/5''@35Amps 110V 50PSI
• •[Portable and easy to assemble] This plasma cutting machine weighs only 14.7lbs, making it easy to carry. The machine is equipped with a 1/4 NPT quick air connector, which users can use after connecting it to the air compressor. Recommend air compressors with a capacity of 100L/MIN or higher (NOTE: Not included the air compressor)
• •[Digital Screen Display] Unique large LED screen design for plasma cutting machine, The screen can clearly display current and voltage provides you with accurate data display and makes you read easier and adjust,The regulator and instrument are installed behind the panel, and you can read the air pressure value through the air gauge, We recommend air pressure value be in the range of 20-50 PSI

Main highlights

• •[Plasma Cutting Thickness]: The plasma cutting equipment with advanced IGBT inverter technology, this high-frequency plasma cutter operates on both 110V and 220V power sources at 50/60 Hz, offering a 60% duty cycle. When using 110V power, it delivers 15-40A of cutting current; on 220V, it ranges from 15-55A. The recommended maximum cutting thickness is 12mm at 40A and 45PSI on 110V , and 18mm at 55A and 70PSI on 220V
• •[Non-Touch Pilot Arc Plasma Cutter]: The CUT55i plasma cutter features a pilot arc function that utilizes high-frequency, non-touch pilot arc. The torch doesn’t need to touch the metal surface to start cutting. The PA (Pilot Arc) adjustable setting allows users to control how long the pilot arc remains active, helping reduce power consumption when not in use and decreasing electrode wear, which ultimately prolongs the life of consumables
• •[Built-in Air Sensor System]: This machine includes an internal air sensor that shows air pressure directly on the front panel. Manual adjustment is possible via the air regulator (automatic pressure adjustment is not supported). A rear-mounted air filter and quick-connect 1/4 NPT fitting allow for fast setup. It’s ready to use right away when connected to an air compressor, with optimal performance at 65 PSI and 250 liters per minute airflow (NOTE: Not included the air compressor)
• •[PT/2T/4T/PA Function]: The post-flow cooling time can be adjusted between 3-15 seconds, which helps dissipate heat from the torch head and prolongs the lifespan of consumables. A setting of 4-8 seconds is typically suggested for optimal performance. The 2T/4T modes provide different levels of automation in cutting operations, reducing the need for manual control. In 2T mode, the system offers semi-automatic operation, while 4T enables fully automatic cutting. The PA (Pilot Arc) function allows adjustment of the pilot arc duration — longer durations are suitable for cutting materials like mesh metal, while shorter durations help reduce wear on consumable parts
• •100% Duty cycle in light work, 60% Duty cycle in heavy work; Max cutting thickness 12mm in 110V 45PSI 40Amps 100mm/min cutting speed, Max cutting thickness 18mm in 220V 70PSI 55Amps 150mm/min cutting speed
• •[Screen Display Synergic Control]: Equipped with a clear digital display, this unit provides real-time monitoring of key parameters such as air pressure, voltage, and current. Users can easily adjust settings on the fly, improving overall efficiency. In case of a malfunction, the screen will show an error code, making it easier to identify and resolve issues quickly

Main highlights

• •Package Include: 10pcs shield cups, 10pcs swirl ring, 20pcs electrodes, 30pcs nozzles
• •These plasma cutter tips are suitable for PT-31, JG-40, LG-40 plasma cutter torch
• •The PT31 consumables are simple and quick to install, ensuring efficient operation of the plasma cutter machine
• •Made of high-quality metal and ceramic to ensure sustained plasma cutter performance and extended lifespan of the plasma cutter consumables
• •These plasma cutter accessories suitable for plasma cutter such as CUT35i, CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, CT520D, Super160, Super160P etc

Main highlights

• •Package include: 10pcs shield cups, 20pcs swirl ring, 30pcs electrodes, 50pcs nozzles
• •These plasma cutter tips are suitable for PT-31, JG-40, LG-40 plasma cutter torch
• •The PT31 consumables are simple and quick to install, ensuring efficient operation of the plasma cutter machine
• •Made of high-quality metal and ceramic to ensure sustained plasma cutter performance and extended lifespan of the plasma cutter consumables
• •These plasma cutter accessories suitable for plasma cutter such as CUT35i, CUT-40, CUT-40D, LGK-40, CT312, CT312D, CT416, CT416D, CT518, CT518D, CT520D, Super160, Super160P etc

Main highlights

Main highlights

Main highlights

Main highlights