Top 10 Best diving board paint kit in 2026

Main highlights

• •Includes 1 gallon base and 1 quart catalyst. Must be thoroughly mixed before use. Gallon is short filled to allow mixing of catalyst for a finished single gallon of mixed paint.
• •Approximately 125 - 150 square feet per gallon
• •Results cannot be guaranteed. Digital screens may not show color accurately.

Main highlights

• •UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives
• •LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel; easy to clean - scrubbing won't wear away the finish; affordable way to bring your old boat flooring back to life
• •NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing
• •1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces; add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon
• •COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons

Main highlights

• •Applicable Scenarios: Diving board bolts are fixed kits designed to replace two hole residential diving boards with a length of 6, 8 or 10 feet. Regular inspection and replacement of the diving board bolt kit can avoid the danger caused by bolt damage and let you enjoy the fun of swimming pool in summer without worry
• •Package Contents: The diving board mounting kit consists of 2 1/2 x 4-1/2" stainless steel carriage bolts, 2 washer caps tops, 2 washer caps bottom, 4 rubber mounting washers, 2 stainless steel flat washers, 2 stainless steel lock washers, 2 copper nuts, 2 vinyl protective caps
• •Sturdy and Stable Material: All the metal parts of the dividing board bolt kit are made of high quality stainless steel, which is strong and wear resistant and provides strong locking force. Both plastic and rubber parts are made of corrosion resistant and oxidation resistant polymer materials to achieve a longer service cycle and reduce the maintenance frequency greatly
• •Simple Installation: The installation of the residential diving board bolts are very simple. The best installation effect can be achieved by strictly following the parts arrangement sequence in the manual. The rubber gasket can provide toughness and eliminate abnormal noise. The gasket cover and vinyl protective cap can beautify the appearance and prevent scratches caused by exposed metal parts
• •Benefits and Services: The dividing board hardware kit can provide sufficient security when you use the dividing board. Before purchasing, please confirm whether the diving board screws size is suitable for your dividing board. We offer 100% satisfaction guarantee and friendly customer service

Main highlights

• •High quality 304 stainless steel diving board bolts replacement &hardware. Just like the original Inter-Fab diving board bolt kit.
• •The DB-TB-M diving board mounting kit replacement for most two-hole Inter-Fab diving board. Replaces Inter-Fab Part# DB-TB-M
• •Perfect diving board replacement bolts hardware for two-hole residential diving boards,replace original old rusty dangeous board mounting bolts set on the diving board
• •Good choice to renovate aging diving board,made diving board safe&fresh look again.No need to buy the whole diving board,just remove the broken corroded bolts,washer,cap etc. Save money!
• •Everything in need for a replacement bolt kit,includes---2pcs 1/2 " Hex Nuts + 2pcs 1/2" Lock Washers + 2pcs 1/2 " Plastic Nut Cap + 2pcs 1/2" x 2" Flat Washers + 2pcs 1/2" x 5" Bolts + 2pcs 1/2"Black Rubber Mounting Washers + 2pcs 1/2"Red Rubber Mounting Washers + 2pcs White Plastic Recessed Mounting Washer Assembly.

Main highlights

• •Results cannot be guaranteed. Digital screens may not show color accurately.

Main highlights

• •Must be thoroughly mixed with catalyst before use.
• •Approximately 22 - 27 square feet per quart
• •Results cannot be guaranteed. Digital screens may not show color accurately.

Main highlights

• •Applicable Models: White diving board mounting kit suitable replacement for most two-hole diving boards, including the Part Number# DB-TB-M.
• •Easy Installation: Simple operation that involves removing the broken bolts and replacing them with the new kit. No need to purchase an entire new diving board.
• •Material Reliable: Made of great stainless steel diving board bolts & hardware for durability and long-lasting performance. Provides a safe and fresh look to your diving board.
• •Comprehensive Features: Includes all the necessary components for a complete replacement bolt kit, such as nuts, bolts, washers, plastic nut caps, rubber mounting washers, and more.
• •Cost-Effective Solution: Allows you to renovate aging diving boards without the need to purchase a new one, helping you save money while ensuring safety and functionality.

Main highlights

Main highlights