Top 10 Best mt1 drill chuck in 2026

Last Updated - 6/12/2026

🏆Best Choice

BMWOOD

PM-002/MT1 Pen Mandrel Kit with 5pc Bush, 7mm Drill Bit and Mandrel Saver, MT1 for woodturning.

9.8

ChoiceComparer.com Score

9.8

/ 10

Outstanding

Main highlights

•READ CAREFULLY: PM-002/MT1 with MT1 taper is Dedicated for MT1 taper spindle lathes ONLY such as Grizzly T32536 - 8" x 13" Variable-Speed Benchtop Wood Lathe, Shop Fox W1704 - 8" x 13" Benchtop Wood Lathe, Apprentice 812 VS Mini Lathe, WEN LA3421 8-Inch by 13-Inch Variable Speed Mini Benchtop Wood Lathe, Craftex CX815 8" X 13" VARI SPEED WOOD LATHE, Rivolver CWI-WL125 8″ x 12″ Vari-Speed Wood Lathe, KING KWL-813VS 8'' X 13'' VARIABLE SPEED WOOD LATHE and other Mini lathes with MT1 taper spindle. MAKE SURE TO CHECK YOUR LATHE BRAND & SPINDLE TAPER MT1 FIRST to Avoid Unfitting or Return.
•This Pen Mandrel Kit has all you need to start turning your own pens. Includes a 7mm drill bit, mandrel, and live mandrel saver..The live mandrel saver allows you to attached your pen mandrel to your tailstock without over-tightening or under-tightening.
•The pen mandrel slides through the center bore in the live center nose, so mounting adjustments are fast and super secure.
•The shaft is made by hardened stainless steel for durability and smooth operation.
•A perfect kit to eliminate damaged mandrels and out-of-round pen blanks by putting pressure directly on the pen bushing, not the mandrel.

View offer on:

$36.99

Check Price

KingTool

KingTool 4 Pcs Drill Chuck Set - 1/2-Inch Drill Chuck with Chuck Key with #1 (JT33-MT1) and #2 (JT33-MT2) Morse Taper Arbor

9.7

ChoiceComparer.com Score

9.7

/ 10

Outstanding

Main highlights

•【Woodworking Tool Kits】You will have a One-stop Shopping here to buy a drill chuck tool kits Includes 1/32" - 1/2" Drill Chuck(JT33) , Two Mose taper Arbors (JT33-MT1 & JT33-MT2), Jaw Tightening Key
•【Heavy Duty Drill Chuck】Clamping Range: 1/32" - 1/2"; Chuck Overall Length: 3.38in/86mm,Accuracy: 0.005",Chuck Mount : JT33. This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts both #1MT and #2MT accessories.
•【 Morse Taper Arbor】Two Morse Taper Arbors MT1-JT33 and MT2-JT33 are provided so that the Drill Chuck can be used interchangeably between different equipments at any time. Both Morse Taper MT1 (#1) and Morse Taper MT2 (#2) to Jacobs Taper JT33.
•【Jaw Tightening Key】Easily open and close the three chuck jaws using the Jaw Tightening Key
•【Perfect Combination】Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more. In order to better help you choose the right bit and drill chuck from a wide range of tools, we have combined the best products for you, and all the size details of the products have been shown in the pictures, so don't worry about buying the wrong accessories.

View offer on:

$39.99

Check Price

WEN

WEN LA136K 1/2-Inch Keyed Drill Chuck with MT1 Arbor Taper

9.5

ChoiceComparer.com Score

9.5

/ 10

Outstanding

Main highlights

•Holds drill bits, pen mandrel shafts, and workpieces up to 1/2 inch in diameter
•Easily open and close the three chuck jaws using the included key
•Compatible with any MT1 drill press, lathe, or mill
•Installs easily with the simple tap of a rubber mallet
•Designed for use with the WEN 3420T and 3421 Wood Lathe

View offer on:

$16.91

Check Price

Earl Diamond

Earl Diamond Super Heavy Duty 1/2-Inch Drill Chuck with #2 Morse Taper Arbor & Chuck Key (1/2" MT2)

9.4

ChoiceComparer.com Score

9.4

/ 10

Excellent

Main highlights

•Material: Made of durable bearing steel, Hardness HRC60.
•Heavy Duty Drill Chuck: Includes the 1/2" drill chuck, #2 Morse Taper Arbor and Jaw Tightening Key.
•Morse Taper Arbor: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
•Apply To: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
•Clamping Range: 1-13mm (1/32" - 1/2") Accuracy: 0.005".

View offer on:

$29.99

Check Price

HARFINGTON

HARFINGTON 2 PCS Morse Taper Drift Key Carbon Steel Drill Chuck Sleeve for MT1-MT2 Removes Morse Taper Adapter

9.2

ChoiceComparer.com Score

9.2

/ 10

Excellent

Main highlights

•Size - 5.4*24.6*6mm (Minimum width*Maximum width*Thickness),3.67*19.7*5mm (Minimum width*Maximum width*Thickness), Total Length: 190mm / 7",140mm / 5.5".
•Material - Morse taper drift made of carbon steel with high wear resistance and hardness.
•Feature - Adopts an overall quenching process and has strong impact resistance. The surface is precision ground for easy installation and removal on Morse taper adapter holes.
•Application - The taper handle is a tool with a triangular cross-section. It is often used to separate or disassemble two interconnected or embedded objects, such as disassembling Morse taper rods connected to lathes and drill press accessories.
•Note - Correctly select the appropriate wedge iron size and angle. When using it, you must pay attention to the insertion direction and check whether it is tight.

View offer on:

$9.99

Check Price

LLDSIMEX

1/32-1/2 INCH JT33 Heavy Duty Drill Chuck With Key

9.1

ChoiceComparer.com Score

9.1

/ 10

Excellent

Main highlights

•Capacity 1/32" to 1/2"
•Includes one keys
•Taper Mount JT33 installs by friction on a tapered shaft of the drill press, no threads
•Runout: .005"
•diameter of the outer housing：53mm

View offer on:

$17.99

Check Price

PSI Woodworking

PSI Woodworking Products TM31 1/2-Inch Drill Chuck with #1 Morse Taper Arbor (1/2" 1MT)

8.9

ChoiceComparer.com Score

8.9

/ 10

Great

Main highlights

•Includes the 1/2" Drill Chuck, #1 Morse Taper Arbor, and Jaw Tightening Key
•This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #1MT accessories
•The #1MT Arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included
•Removes easily with knock out bar
•Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more

View offer on:

$31.90

Check Price

HAowosi

1/2" Drill Chuck with #1 (JT33-MT1) and #2 (JT33-MT2) Morse Taper Arbor Heavy Duty Drill Chuck with Chuck Key

8.8

ChoiceComparer.com Score

8.8

/ 10

Great

Main highlights

•Versatile Clamp Range: Holds drills, quill shafts and workpieces up to 1/2" in diameter.Two Morse taper arbors, MT1-JT33 and MT2-JT33, making the drill chucks readily interchangeable between different machines.
•Strong Clamping Force: With its hardened 3-jaw design, this drill chuck provides a robust clamping force. It ensures a secure grip on the drill bits to prevent slippage during drilling operations.
•Easy to Operate: The included a jaw tightening key allows for easy adjustment of the chuck's tightness, making installation and operation a breeze. Drill chuck includes the 1/2" drill chuck, MT1 and MT2 morse taper arbor and a jaw tightening key.
•Durable Construction: Constructed with high-carbon steel and utilizing surface polishing technology, this mini lathe drill chuck is resistant to oxidation, waterproof, and corrosion-resistant.
•Compatible with any MT1 and MT2 drill press, lathe, or mill

View offer on:

$20.99

$22.39

-6%

Check Price

HAowosi

1/32" to 1/2" Drill Chuck with MT1-JT33 Morse Taper Arbor,Heavy Duty Drill Chuck with Chuck Key

8.6

ChoiceComparer.com Score

8.6

/ 10

Good

Main highlights

•Reliable and Heavy Duty: Our Heavy Duty Drill Chuck 1/32" - 1/2" is designed to withstand heavy-duty applications, providing exceptional clamping force for secure and precise drilling operations.
•Wide Clamp Range: With a clamp range from 1/32" to 1/2", this drill chuck offers versatility, accommodating a wide range of drill bit sizes and allowing for various drilling needs.
•Durable and Resistant: Constructed with high-carbon steel and featuring surface polishing technology, this mini lathe drill chuck is resistant to oxidation, waterproof, and prevents corrosion. It ensures long-lasting durability and reliable performance.
•Easy to Operate: The included chuck key allows for easy adjustment of the chuck's tightness, ensuring effortless installation and operation. It provides enhanced efficiency and control during use.
•Versatile Compatibility: Perfect drill chuck accessory for small turning lathe, or any lathe or drill press with a MT1 spindle.

View offer on:

$17.99

Check Price

ADI

Tool Steel Drill Chuck ARBORS (MT1 Shank- MOUNTING Thread M12 x 1)

8.5

ChoiceComparer.com Score

8.5

/ 10

Good

Main highlights

•MT1 Shanks is Hardened and Precisely ground.
•Quality Tool Steel Drill Chuck Arbors
•QUALITY TOOL.
•MADE OF TOOL STEEL AND ARE PRECISELY GROUND.
•Mounting Thread is M12 x 1 to mount the Drill Chuck

View offer on:

$12.99

Check Price

📊

📈 How we rank

With our cutting-edge technology, we examine thousands of products and retailers, assessing reviews, ratings, trends, and sales rankings to identify what matters most to users like you.

Our team evaluates this data alongside genuine user feedback, merging AI analysis with human insights to provide you with real-time, highly-rated recommendations that empower your decision-making with clarity and confidence.