Top 10 Best injora scx24 in 2026

Last Updated - 6/20/2026

🏆Best Choice

INJORA

INJORA 40mm Big Bore Oil Shock Absorber for 1/24 SCX24 FCX24M Upgrade, 3.2g/each(Aluminum & Nylon)

9.8

ChoiceComparer.com Score

9.8

/ 10

Outstanding

Main highlights

•CNC machined aluminum shock caps, bodies, and bottom caps. Black electroplated steel shock shaft.
•These big bore shocks feature threaded bodies for quick pre-load adjustments.
•Two spring rates are included allowing you to fine tune these shocks to your chassis.
•Big bore design holds more oil for better performance.
•Internally these use shock oil (not included) instead of the typical friction dampening and employ bladder seals for consistent rebound dampening. Note: Use shock oil (not included) to add only enough oil for a heavy coating. Do not fully fill shock body.
•The shock bottom rod ends are available in nylon or brass for your choice.
•Full Length: 46.5mm (1.83in), Maximum Travel: 9mm (0.35in), Maximum Travel: 9mm (0.35in).

View offer on:

$19.99

Check Price

INJORA

INJORA Brass Skid Plate-Heavy Counterweight Chassis Accessories for 1/24 RC Crawler Car Axial SCX24 Gladiator Bronco C10 JLU Deadbolt Upgrades Parts, 15g

9.7

ChoiceComparer.com Score

9.7

/ 10

Outstanding

Main highlights

•Metal Skid Plate is made of high-quality brass and etched with the INJORA logo, high-quality reliable.
•Compared with the stock parts, it provides a better center of gravity and helps to improve rear traction and stability.
•The black hard coating with chamfered edges adds a bright touch to your car, to prevent corrosion also.
•Easy to install, solid and durable,better protect your transmission when the RC car is crawling.
•The RC skid plate upgrades parts suit for 1/24 RC Crawler Axial SCX24 Gladiator Bronco C10 JLU Deadbolt AXI90081.

View offer on:

$14.98

Check Price

INJORA

INJORA CNC Aluminium Forward & Reverse Skid Plate for 1/24 RC Crawler SCX24 Upgrade(Black)

9.5

ChoiceComparer.com Score

9.5

/ 10

Outstanding

Main highlights

•Offers forward or reverse transmission installation, enhancing versatility.
•Flat bottom design improves ground clearance for better climbing performance.
•CNC aluminum skid plate for SCX24 RC crawler upgrade, durable and lightweight.
•Black anodized finish for corrosion resistance and sleek appearance.
•Easy to install, directly replaces the stock plastic skid plate.

View offer on:

$9.99

Check Price

INJORA

INJORA High Clearance Front 4 Links Set for SCX24 C10 JLU Bronco Base Camp 4Runner Axial 1/24 RC Crawler Car, 8PCS（Grey）

9.4

ChoiceComparer.com Score

9.4

/ 10

Excellent

Main highlights

•Grey anodized aluminum CNC link for ultimate durability
•Engraved with the INJORA logo, look more attractive
•Replaces the original SCX24 Y-link, avoids friction with the drive shaft, provides a smoother ride
•Links eliminate axle wrap and unwanted axle steering, and it has a higher clearance when climbing
•Suit for 1/24 RC Crawler Car LWB 133.7mm Axial SCX24 C10 JLU Bronco Base Camp 4Runner

View offer on:

$18.98

Check Price

INJORA

INJORA Black Coating Brass 1.0 Beadlock Wheel Tires Set for Axial SCX24 AX24 TRX4M FCX24 Upgrade 1/24 1/18 RC Crawler Car（Black）

9.2

ChoiceComparer.com Score

9.2

/ 10

Excellent

Main highlights

•INJORA S5 Compound 1.0" 58*24mm crawler tires with high precision CNC machined -2.65mm offset brass wheel.
•Negative 2.65mm offset, widen wheel spacing for a better stability, can improve the performance.
•Heavy-duty bias ply construction and aggressive side lug design for excellent durability and tread flexibility, provides improved side-bite on difficult off-road and rocky terrain.
•Multi-curve tread siping improves traction on loose dirt and slippery terrain. Unique tread element arrangement ensures a uniform tread contact area for maximum road contact.
•Perfectly suited for Axial SCX24 AX24 TRX4M FCX24 Upgrade 1/24 1/18 RC Crawler Car.

View offer on:

$42.99

Check Price

INJORA

INJORA RC Brass Extended Hex Wheel Hubs for 1/24 RC Crawler Car Axial AX24 SCX24 90081 Upgrade Parts

9.1

ChoiceComparer.com Score

9.1

/ 10

Excellent

Main highlights

•The RC hex hub is made of high quality brass, solid and abrasion proof.
•Heavier weight can lower the center of gravity and improve stability.
•Extends the distance of the wheel and makes your car more stable and cool.
•Fit wheel rim which center aperture is bigger than 3mm.
•Compatible with 1/10 RC Crawler Car Axial SCX10 90046 D90.

View offer on:

$8.99

Check Price

INJORA

INJORA MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Outrunner Motor for 1/24 Axial SCX24 Upgrade

8.9

ChoiceComparer.com Score

8.9

/ 10

Great

Main highlights

•Note: Some noise at mid-throttle is normal for the 1721 motor due to its high-speed, open-rotor design. This does not indicate a defect.
•The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro crawlers and is programmable.
•Smooth and linear at low speeds, powerful and aggressive at high speeds. Runs more quietly than brushed systems, producing virtually no noise.
•MBL32 G2 features a built-in BEC with adjustable output: 6V/7.4V.
•Waterproof Design for all-weather performance.
•Supports PC Programming via USB programmer card (Not Included). Factory settings are optimized for INJORA 1721/2204 motors—adjustments are not recommended.
•Multiple Protections: Low-voltage, fail-safe, and rotor lock protection.
•1721 purple viper outrunner motor, equipped with a mounting plate to install on SCX24.

View offer on:

$56.99

Check Price

INJORA

INJORA +4mm Planet Axles with Double Joint Shafts & Brass Steering Knuckles for 1/24 Axial SCX24 Upgrade(Black)

8.8

ChoiceComparer.com Score

8.8

/ 10

Great

Main highlights

•Note: Come with adjustable rear axle truss upper link mount. Only compatible with the SCX24 stock rear link mount and INJORA rear axle truss upper link mount (SCX24-78).
•Planet-Inspired Axle Design: Planet-shaped differential housing, precisely CNC-machined for a highly realistic scale appearance. Seamless integration with the axle tubes enhances visual accuracy.
•’+4mm Width Per Side: Adds a total of 8mm width to enhance stability while maintaining scale accuracy.
•Double Joint Shaft Design: Minimizes outer wheel vibration when turning at extreme angles.
•Precision CNC Aluminum Steering Link: Shortens the distance between the steering link and the axle housing, ensuring a compact and clean design without excessive protrusion.
•Hardened Steel 2/16T Worm Gear Set: Made from aerospace-grade 20CrMnTi hardened steel for smooth, consistent performance and exceptional durability on tough terrain.
•Brass Steering Knuckles: Adds front axle weight for improved traction, better climbing capability, and enhanced steering response.

View offer on:

$79.99

Check Price

INJORA

INJORA Magnetic Body Mount Invisible Body Post for 1/24 RC Crawler SCX24 LCG Chassis Upgrade, 10g

8.6

ChoiceComparer.com Score

8.6

/ 10

Good

Main highlights

•Excellent Quality: Made of aluminum, sturdy and durable.
•Strong Magnet Adsorption: Ensures robust and reliable attachment, holding the body shell securely in place through all types of terrains and conditions.
•Simplified Installation: Easily attach and detach the body shell with minimal effort, requiring only one screw on each side when installed on the INJORA LCG Chassis.
•Universal Compatibility: Equipped with multiple pre-drilled screw holes on both sides of the stand to accommodate a variety of LCG chassis types. While this design is intended to maximize compatibility, due to the diverse nature of chassis designs, we cannot guarantee a perfect fit for all other brands without modification.
•Compatible Model: Fully applicable to INJORA LCG chassis. Note: Not compatible with SCX24 stock chassis!

View offer on:

$9.98

Check Price

INJORA

INJORA Universal LCG Carbon Fiber Chassis Frame Kit for 1/24 Axial SCX24 Upgrade, 35g

8.5

ChoiceComparer.com Score

8.5

/ 10

Good

Main highlights

•Two types of wheelbase are adjustable and the included magnetic mount can fit various bodies, highly flexible.
•Larger 8° angled skid plate has more outstanding performance in climbing.
•Multiple-Shock-Mounting-Points design for better suspension tuning.
•Come with extra trays and side panels to put electronic equipment easily.
•Compatible with SCX24 C10, Wrangler, Bronco, Deadbolt, Gladiator and Dodge Power Wagon.

View offer on:

$21.99

Check Price

📊

📈 How we rank

With our cutting-edge technology, we examine thousands of products and retailers, assessing reviews, ratings, trends, and sales rankings to identify what matters most to users like you.

Our team evaluates this data alongside genuine user feedback, merging AI analysis with human insights to provide you with real-time, highly-rated recommendations that empower your decision-making with clarity and confidence.